You are here: Home » Product » Pulverizer machine » Paint bucket pulverizer
Paint bucket  pulverizer
Paint bucket  pulverizer

Paint bucket pulverizer

Production: 0.6-150t/h Scope of application: paint bucket, gasoline drum, diesel drum, oil barrel Application area: scrap metal recycling

Get a quote

7 * 24 hour free hotline

+86 15538302857

60 seconds response

Reply within 30 minutes

24-hour free plan

Paint bucket  pulverizer

The paint bucket pulverizer is a kind of hitting crushing metal equipment. It is mainly used for crushing and processing waste metal barrels such as paint buckets, gasoline drums, diesel drums and oil drums. The paint bucket crusher mainly has equipment composition. : Crusher main machine, feeding conveyor, discharge conveyor, centralized dust collector, magnetic separator, etc. to achieve the purity of waste paint bucket. The paint bucket crushed by the machine has the advantages of low metallurgical cost, low transportation cost, energy saving and environmental protection. The paint bucket crusher is also a new type of high efficiency, energy saving and environmentally friendly metal crusher. The machine has the characteristics of flexible operation, tight structure and large output.

Paint bucket  pulverizer

Structural principle

In the work flow, the paint bucket crusher is sent to the equipment for forced feeding and crushing through the paint bucket of the feeding conveyor, and the metal briquetting is subjected to primary crushing by crushing of the pressing roller and the coarse crushing shaft, after primary crushing. The paint bucket enters the main cavity of the device. Under the drive of the high-speed and high-torque motor, the hammer on the main rotor alternately hits the paint bucket entering the main cavity through the space between the liner and the hammer, and the crushed paint bucket is in the crushing chamber. A sufficient and effective fine crush can be obtained from the screen and flow down from the screen. The crushed material passes through the air cyclone sorting system to separate the paint, rust and waste plastic of the paint bucket, and the material discharged at the bottom of the equipment is transported to the collecting point through the conveying equipment, and the non-magnetic material contained in the material in the process Under the action of the magnetic separator, the production line is sorted and discharged to the non-magnetic material pile. In addition, the entire system is equipped with a dust removal device to reduce the dust pollution hazard generated during the production process. The equipment mainly has the advantages of high output, low energy consumption, high efficiency, uniform discharge and fineness.

Paint bucket  pulverizer


model power Application range Rotating speed Processing capacity(t/h) Dimensions(mm) weight(t)
800PSJ-C 37-55 Cans, thin iron, light metal 1250 0.7-1 3800*1600*1800 3.2
1000PSJ-C 45-75 Small metal packing, cans, scrap metal 1250 0.8-1.5 2560*1800*2200 7.6
1300PSJ-C 90-150 Scrap metal blocks such as bicycles and motorcycles 860 2-4 4000*3500*3200 11.5-26
1600PSJ-C 200-280 Scrap metal parts such as automobile cutting parts and paint buckets 750 4-6 4800*4000*3800 16.6-35
1800PSJ-C 220-450 Scrapped large scrap metal blocks 650 6-10 4800*4100*4000 32-48
2000PSJ-C 315-630 Scrapped large scrap metal blocks 650 8-12 5000*4500*4300 35-65
2200PSJ-C 500-900 Scrapped large scrap metal blocks 650 15-20 5000*4500*4300 35-65
2400PSJ-C 1250-2250 Large metal packing, car shell 650 20-45 6300*4800*4500 85-120
2800PSJ-C 1600-3300 Various scrap metal 650 70-100 6400*5200*4800 145-230
3000PSJ-C 3300-4400 Various scrap metal 650 110-140 8500*7200*5500 280-760


Aluminum can crusher

Device name:Aluminum can crusher

Steel tile crusher

Device name:Steel tile crusher

Metal pulverizer

Device name:Metal pulverizer

Online message

If you are interested in our products, you can call us at:
+86 15538302857You can also leave us a message below, we will be happy to serve you!

  • Name(*):
  • E-mail(*):
  • Equipment requirements:

Contact us

You fill in your needs and we will personalize the products that are right for you.

Contact information

Address: Yong'an Road, Gongyi City, Henan Province, China

phone:+86 15538302857

E-mail:[email protected]

Hongyuan Machinery    Address: Yong'an Road, Gongyi City, Henan, China  

Sservice Contact us

Hongyuan Machinery    Address: Yong'an Road, Gongyi City, Henan, China