You are here: Home » Product » Crushing machine » Metal crusher
Metal crusher
Metal crusher

Metal crusher

Production: 0.6-150t/h Scope of application: used cars, light and thin materials, scrap iron, color steel tiles, cans Application area: scrap metal recycling

Get a quote

7 * 24 hour free hotline

+86 15538302857

60 seconds response

Reply within 30 minutes

24-hour free plan

The metal crusher is mainly used for the crushing and crushing of various scrap metal such as can crushing, color steel tile crushing, scrapping automobile crushing, paint barrel crushing, iron chip crushing and so on. Achieve fine processing of scrap metal to achieve a better prospect of interest in scrap metal transportation costs and recycling prices. In the structure of the equipment, the main casing is made of special thick steel plate, and the inner lining is made of high-manganese steel casting to protect the outer body. In the rotor part of the main machine, the machine adopts the disc-type fastening rotating mechanism, and there are several on the rotor. The steel plates are mounted on the horizontal axis (the number and diameter of the steel plates are based on the model). There are 6 pins on the circumference of the steel plate. There are several hammers in the axial direction for crushing the material. The spindle is supported by ball bearings. The circulating oil is forcibly lubricated and cooled, and is equipped with a temperature sensor to ensure high-speed and stable operation of the equipment. The crushing operation of the scrap steel is completed by the cooperation of the above casing and the main shaft.
Metal crusher

Metal crusher

Structural principle

In the workflow, the metal crusher is fed into the equipment through the feeding conveyor metal to force the feeding and crushing port, and the metal is subjected to primary crushing through the crushing process of the pressing roller and the coarse crushing shaft, and the metal after the primary crushing enters the main cavity of the device. Driven by the high-speed and high-torque motor, the hammer on the main rotor alternately strikes the metal entering the main cavity through the space between the lining and the hammer. The crushing block can be fully and effectively in the crushing cavity. Finely pulverized, the torn material to be crushed into a conformable crushed material, and then flowed down from the screen. The crushed material is separated by air swirling sorting system, and the paint, rust and waste plastic in the metal are separated, and the material discharged at the bottom of the equipment is transported to the collecting point through the conveying equipment, and the non-magnetic material contained in the material is collected in the process. Under the action of the magnetic separator, the production line is sorted and discharged to the non-magnetic material pile. In addition, the entire system is equipped with a dust removal device to reduce the dust pollution hazard generated during the production process. The equipment mainly has the advantages of high output, low energy consumption, high efficiency, uniform discharge and fineness. Moreover, when the device is used, the noise is low, pollution-free, and the operation is simple and the maintenance is convenient.

Metal crusher


model power Application range Rotating speed Processing capacity(t/h) Dimensions(mm) weight(t)
800PSJ-C 37-55 Cans, thin iron, light metal 1250 0.7-1 3800*1600*1800 3.2
1000PSJ-C 45-75 Small metal packing, cans, scrap metal 1250 0.8-1.5 2560*1800*2200 7.6
1300PSJ-C 90-150 Scrap metal blocks such as bicycles and motorcycles 860 2-4 4000*3500*3200 11.5-26
1600PSJ-C 200-280 Scrap metal parts such as automobile cutting parts and paint buckets 750 4-6 4800*4000*3800 16.6-35
1800PSJ-C 220-450 Scrapped large scrap metal blocks 650 6-10 4800*4100*4000 32-48
2000PSJ-C 315-630 Scrapped large scrap metal blocks 650 8-12 5000*4500*4300 35-65
2200PSJ-C 500-900 Scrapped large scrap metal blocks 650 15-20 5000*4500*4300 35-65
2400PSJ-C 1250-2250 Large metal packing, car shell 650 20-45 6300*4800*4500 85-120
2800PSJ-C 1600-3300 Various scrap metal 650 70-100 6400*5200*4800 145-230
3000PSJ-C 3300-4400 Various scrap metal 650 110-140 8500*7200*5500 280-760


Wood sawdust making machine

Device name:Wood sawdust making machine

900 type scrap crusher

Device name:900 type scrap crusher

Automobile crushing production line

Device name:Automobile crushing production line

Online message

If you are interested in our products, you can call us at:
+86 15538302857You can also leave us a message below, we will be happy to serve you!

  • Name(*):
  • E-mail(*):
  • Equipment requirements:

Contact us

You fill in your needs and we will personalize the products that are right for you.

Contact information

Address: Yong'an Road, Gongyi City, Henan Province, China

phone:+86 15538302857

E-mail:[email protected]

Hongyuan Machinery    Address: Yong'an Road, Gongyi City, Henan, China  

Sservice Contact us

Hongyuan Machinery    Address: Yong'an Road, Gongyi City, Henan, China