In the workflow, the metal crusher is fed into the equipment through the feeding conveyor metal to force the feeding and crushing port, and the metal is subjected to primary crushing through the crushing process of the pressing roller and the coarse crushing shaft, and the metal after the primary crushing enters the main cavity of the device. Driven by the high-speed and high-torque motor, the hammer on the main rotor alternately strikes the metal entering the main cavity through the space between the lining and the hammer. The crushing block can be fully and effectively in the crushing cavity. Finely pulverized, the torn material to be crushed into a conformable crushed material, and then flowed down from the screen. The crushed material is separated by air swirling sorting system, and the paint, rust and waste plastic in the metal are separated, and the material discharged at the bottom of the equipment is transported to the collecting point through the conveying equipment, and the non-magnetic material contained in the material is collected in the process. Under the action of the magnetic separator, the production line is sorted and discharged to the non-magnetic material pile. In addition, the entire system is equipped with a dust removal device to reduce the dust pollution hazard generated during the production process. The equipment mainly has the advantages of high output, low energy consumption, high efficiency, uniform discharge and fineness. Moreover, when the device is used, the noise is low, pollution-free, and the operation is simple and the maintenance is convenient.
If in doubt, please call the sales hotline：+86 15538302857
Hongyuan Machinery Address: Yong'an Road, Gongyi City, Henan, China