You are here: Home » Product » Shearing machine » Hydraulic shear
Hydraulic shear
Hydraulic shear

Hydraulic shear

The hydraulic shearing machine is mainly used for the opening of metal plates such as steel plates,

Get a quote

7 * 24 hour free hotline

+86 15538302857

60 seconds response

Reply within 30 minutes

24-hour free plan

The hydraulic shearing machine is mainly used for the opening of metal plates such as steel plates, copper plates and nickel plates. Shear force is 100 tons to 250 tons. Mainly cut material size (12~20mm)*250mm. The number of cuts is 8 to 12 times per minute. This series requires a simple infrastructure. The gantry shear is hydraulically driven. Compared with the mechanical transmission shearing machine, it has the characteristics of small volume, light weight, small motion inertia, low noise, smooth motion, flexible operation and large shear section. Integrated liquid-electric control, single-time, continuous motion conversion, easy to use, stop and run at any working position, easy to achieve overload protection. It can be used in a wide range of applications, as a processing equipment for metal recycling processing units, as a metal cutting equipment for furnace processing and mechanical construction in the foundry of the factory.
Hydraulic shearHydraulic shear
Features
1. Add a high pressure filter to the hydraulic system. That is, the hydraulic oil needs to pass through the high pressure filter to enter the pipeline and the hydraulic control valve. (High pressure filter comes with an alarm)
2, independent air cooling: This machine uses a large air volume air cooler to control the oil temperature of the hydraulic oil within the normal use range. At the same time, the air-cooling machine page solves the problem that the water-cooled machine covers an inconvenient water source.
3, PLC hand – automatic control box. Manual and automatic replacement is possible. With remote control operation, remote start, stop and automatic operation.
4, with a pressure cover push tank: can achieve automatic feeding, while the material along the gland to advance the main shear machine for cutting.

5. Special universal joint device at the front end of the cylinder rod. Effectively protect the cylinder rod from damage.

Hydraulic shear

Parameters

model

Shear force(TON)

Pressing force(TON)

Knife length(MM)

Dehisce(MM)

Cuts per minute(T/S))

Mainly cut material

size(MM)

Total machine power(KW)

Operation method

QSZ43-63

63

16

600

280

9-16

30X30   Ø35

7.5

Manual feeding or linkage

QSZ4-100

100

16

600

280

9-16

40X40   Ø45

11

QSZ43-120

120

20

600

280

9-16

45X45   Ø50

15

QSZ43-160

160

25

700

320

9-16

55X55   Ø63

18.5

QSZ43-200

200

25

800

380

9-16

65X65   Ø75

22

QSZ43-250

250

26

1000

480

9-16

70X70    Ø80

30

QSZ43-315

315

42

1200

520

8-16

80X80   Ø90

37

QSZ43-400

400

42

1500

700

8-16

90X90   Ø100

44

QSZ43-500

500

42

1800

900

8-16

100X100 Ø110

44

Related

Gantry shear

Device name:Gantry shear

Large gantry shear

Device name:Large gantry shear

Gantry shear

Device name:Gantry shear

Online message

If you are interested in our products, you can call us at:
+86 15538302857You can also leave us a message below, we will be happy to serve you!

  • Name(*):
  • E-mail(*):
  • Equipment requirements:

Contact us

You fill in your needs and we will personalize the products that are right for you.

Contact information

Address: Yong'an Road, Gongyi City, Henan Province, China

phone:+86 15538302857

E-mail:[email protected]

Hongyuan Machinery    Address: Yong'an Road, Gongyi City, Henan, China  

Sservice Contact us

Hongyuan Machinery    Address: Yong'an Road, Gongyi City, Henan, China